Renishaw ADTi-100 User Manual

18
ADT and ADT View user guide
ADTa-100
5.2.1.1 Starting/stopping a plot
Click the green arrow to start a plot. The plot will automatically rescale as the readhead is
movedalongtheaxis.Thearrowwillchangetoaredsquarewhilstdataisbeingrecorded.
To stop a plot, click on the red square.
NOTES:
• When the readhead direction is reversed, the trace direction will reverse and previous data will be overwritten
• Changing screens during data plotting will clear the data and a new plot will restart automatically when the
signal strength vs position screen is reselected. Stop the plot before switching screens to retain the data.
5.2.1.2 Zooming and panning the plot
Theplotcanbezoomedandpannedusingamouse,trackpad,touchscreenorsimilar.
To pan using a mouse:
• Point the mouse at the trace, click and hold the right mouse button and drag the trace left, right,
up or down
Tozoomusingamouse/trackpad:
• Clickwiththeleftmousebuttonthendragthemousetodrawaboxaroundthesectionofinterest
Or
• Movethemousewheeltozoomthewholeplotinorout
Tozoomandpanusingatouchscreendevice.
• Panbyswipingngeralongthescreeninthedirectionyouwanttomovetheplot
• Zoomusingathumbandnger.Movethemawayfromeachothertozoominand‘pinch’them
togethertozoomout.
NOTES:
• Whenzoomingorpanningduringa‘live’plotthedatawillcontinuetobeplottedbutonlythe
selected area will be displayed and the plot will no longer scroll. To display the whole plot, select
‘Resetplotmagnication’.
• Stoppingtheplotwillautomaticallyresetthemagnication

Renishaw ADTi-100 Specifications

General

Brand	Renishaw
Model	ADTi-100
Category	Diagnostic Equipment
Language	English