Renishaw ADTi-100 User Manual

15
ADT and ADT View user guide
ADTa-100
5.1.4 Alarms and warnings
1 An alarm or warning will be displayed on each
screen via a pop-up describing the alarm or warning
condition. This will be displayed for 3 seconds when
an alarm or warning condition occurs.
2 The last alarm or warning that occurred will be
indicated until the alarm and warning log is cleared.
Click the button to open the alarm and warning log
(section 5.1.4.1).
Symbol Warning/Alarm
Position Alarm
Overspeed Warning/Alarm
Low signal Warning
Temperature Warning/Alarm
Possible alarms and warnings:
1
2

Renishaw ADTi-100 Specifications

General

Brand	Renishaw
Model	ADTi-100
Category	Diagnostic Equipment
Language	English