repligen.com XC-LAB-UG-V4
6.7 XCell ATF® Device preparation and set-up
Set-up guides, included with each XCell ATF® Device, describe how to assemble, wet, autoclave (if
stainless steel), test and connect the XCell ATF® Device to the controller. For stainless steel devices,
the autoclavable filter preparation guide comes in the box with each filter.
All Device Set-up Guides are available online
.
6.8 System set-up
Please refer to the separate XCell™ Lab Controller Set-up Guide provided with the equipment.
Access the most up to date version online
.
6.9 IT, Wi-Fi and network connectivity
The XCell™ Lab is designed as a stand-alone control system. Both a wired ethernet and Wi-Fi are
available for data transfer on the Surface Pro tablet. Repligen does not support integration of the
tablet into a network in any way. Please see Appendix B
for further details.
6.9.1 Windows environment
The Surface Pro comes with Windows® 10 Pro installed. The user bears full responsibility for
modifications to the software system. These software changes include, but are not limited to,
Windows software updates, anti-virus applications, and Microsoft® Office products. While we do not
expect any impact to the functionality of the Repligen supplied programs through typical use and/or
Windows® maintenance, we cannot guarantee the correct functioning of the system.
6.9.2 Repligen XCell™ Lab Software
Repligen built XCell™ Lab Software is easy and intuitive to use. It is a Wonderware View application,
with several useful software modules included in this release including Historian, Query and Trend,
as described later in this guide.
6.9.3 Modbus/ethernet remote monitoring
Process data is recorded locally. The system currently does not support third-party interfaces or
remote monitoring.
To Next Page
Loading...