Send Settings
110
2
F Press the User Function key ({F1} to {F3}) programmed with [SUB/SEP Code].
G Enter a SEP Code, and then press the {OK} key.
If you make a mistake, press the {Clear/Stop} key before pressing the {OK}
key, and then try again.
H When a password is required, enter the PWD Code using the number keys,
and then press the {OK} key.
When a PWD Code is not required, just press the {OK} key.
The standby screen returns.
I Press the {Start} key.
Note
❒ Make sure the number of digits in the SEP Code matches the specification
of the machine from which you are receiving. For the maximum number
of digits for the SEP Code of this machine, see “Maximum Values”.
❒ You can enter numbers, p, q, and spaces.
❒ You can store SEP Codes as well as names and fax numbers in the destination list.
❒ The SEP Code is printed on lists and reports.
Reference
p.186 “Maximum Values”
“Fax Features”, General Settings Guide
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gen-
eral Settings Guide
ARX030S
To Next Page
Loading...
