Ricoh 2000 - Searching for a Destination in the Address Book; Search by Name

Searching for a Destination in the Address Book
67
1
Searching for a Destination in the Address
Book
Use this function to search for a destination registered in the destination list or
on the LDAP server.
Important
❒ To search for a destination from an LDAP server, the LDAP server must be
registered in advance. For details about registering LDAP servers, see “Sys-
tem Settings”, General Settings Guide.
Note
❒ The search returns destinations whose first characters match the entered
characters.
❒ A warning message appears if the search returns more than the maximum
number of destinations you can search for at a time. Press [Exit] and change
the destination name to view fewer destinations.
Reference
p.186 “Maximum Values”
“System Settings”, General Settings Guide
Search by Name
Follow these steps to search for a destination registered in the Address Book by
name.
Important
❒ If [LDAP Search] is set to [Off] in Administrator Tools, in the System Settings
menu, the display for selecting either [Search Address Book] or [Search LDAP]
does not appear.
A Press [] to switch the destination to fax number, e-mail address, or
IP-Fax destination.