Ricoh 2000 - Search by Destination List

Searching for a Destination in the Address Book
69
1
G Select a destination using {U} or {T}, and then press {V} to specify it (put
a tick against it).
Multiple destinations can be selected.
Press {W} to deselect a destination.
H Press the {OK} key.
Note
❒ If no destination matches the specified text, the “Specified destination
is not programmed.” message appears. Press [Exit] to return to the dis-
play of step
D
.
❒ You cannot specify destinations twice. If you try, the “
This destination
has already been programmed.
” message appears. Press [Exit] to return
to the standby screen.
❒ Press [Add Dest] to specify other destinations.
Reference
“Entering Text”, About This Machine
Search by Destination List
Follow these steps to search for a destination registered in the Address Book us-
ing the destination list.
Important
❒ If [LDAP Search] is set to [Off] in Administrator Tools, in the System Settings
menu, the display for selecting either [Search Address Book] or [Search LDAP]
does not appear.
A Press [] to switch the destination to fax number, e-mail address, or
IP-Fax destination.