Printing a File from Memory
141
4
Printing a File from Memory
If you want to check the contents of a file that is stored in memory and not yet
sent, use this procedure to print it out.
A Press the {Job Information} key.
B Select [Print TX Standby File] using {U} or {T}, and then press the {OK} key.
C Select the file you want to print using {U} or {T}.
To cancel printing, press the {Escape} key. The display returns to that of step
B
.
D Press [Print].
To cancel printing after pressing [Print], press the {Clear/Stop} key. The display
returns to that of step
B
.
The display returns to that of step
B
after printing a TX Standby File.
Repeat from step
B
, if you want to print another file.
E Press the {Escape} key.
The standby display appears.
ARX037S
To Next Page
Loading...
