Transmission
44
1
Reference
p.45 “Image Density (Contrast)”
JBIG Transmission
If you use JBIG (Joint Bi-level Image experts Group) compression, you can send
originals scanned using Photo faster than with other compression methods.
Important
❒ This function is not available with the Internet Fax function.
❒ This function requires that the other party's fax machine has both the JBIG
function and ECM function.
Resolution
This section explains how to set the resolution of the original.
Images and text are scanned into the machine by converting them to a sequence
of dots. The density of the dots determines the quality of the image and how long
it takes to transmit. Therefore, images scanned at high resolution have high
quality but transmission takes longer. Conversely, low resolution scanning re-
sults in lower quality but the original is sent more quickly. Select the setting that
matches your needs based upon this trade off between speed and image clarity.
❖ Standard (8 x 3.85 lines/mm, 200 x 100 dpi)
Select for originals containing normal size characters.
❖ Detail (8 x 7.7 lines/mm, 200 x 200 dpi)
Select for originals containing small characters or when you require greater
clarity. This resolution is twice as fine as Standard.
❖ Fine (8 x 15.4 lines/mm, 200 x 400 dpi)
Select for originals with fine details or when you require the best possible im-
age clarity. This resolution is four times finer than Standard.
A Press the {Resolution} key to switch between resolutions.
The indicators above the key show the current selection.
ARX026S
To Next Page
Loading...
Need help?
General
