Two-Sided Transmission (Double-Sided Transmission)
115
2
Note
❒ When using this function, two-sided originals cannot be sent by using just
the exposure glass.
❒ The front and back of the scanned original will be printed in order on sep-
arate sheets at the other end. The orientation of alternate sheets may be re-
versed at the other end. If you want to print the original with the same
orientation at the other end, specify the original position and page opening
orientation.
❒ This function is only available with Memory Transmission.
❒ This function is only available with the ARDF.
❒ You can confirm whether both sides were properly scanned using the
Stamp function.
❒ You can program one of the User Function keys with operations for this
function. Using the User Function keys allows you to omit steps
B
and
C
.
❒ Make sure that the specified original position matches the orientation of
originals loaded in the ARDF.
Reference
p.33 “Placing Originals”
p.40 “Transmission with Image Rotation”
p.40 “Stamp”
p.43 “Scan Settings”
“Fax Features”, General Settings Guide
To Next Page
Loading...
