Transmission Modes
17
1
F Specify the next destination.
Pressing [] switches the type of transmission between fax number, e-
mail address, and IP-Fax destination.
A fax number, e-mail address and IP-Fax destination can be specified simul-
taneously.
G Press the {Start} key.
Note
❒ If the combined total number of programmed destinations exceeds the
maximum value, only Immediate Transmission is possible.
❒ For the maximum number of destinations you can specify per file, see
“Maximum Values”.
❒ For the maximum number of destinations you can specify for all files (in-
cluding files in memory), see “Maximum Values”.
❒ For the maximum number of documents you can store in memory for
Memory Transmission, see “Maximum Values”.
❒ For the maximum number of pages you can store in memory (using A4
Standard <ITU-T q1 Chart>), see “Maximum Values”.
Reference
p.43 “Original Type”
p.44 “Resolution”
p.45 “Image Density (Contrast)”
p.47 “Sending Over a Fax Line”
p.49 “Sending by IP-Fax”
p.53 “Sending to an E-mail Address”
p.58 “Specifying a destination using the Quick Dial key”
p.59 “Specifying a group of destinations using the Quick Dial key”
p.62 “Redial”
p.186 “Maximum Values”
“Fax Features”, General Settings Guide
“Troubleshooting When Using the Facsimile Function”, Troubleshooting
To Next Page
Loading...
Need help?
General
