Ricoh 2000 User Manual

Transmission
22
1
A Make sure that Immediate Trans. indicator is lit.
If Memory Trans. indicator is lit, press the {Transmission Mode} key to select
Immediate Transmission mode.
B Place the original.
C Select the scan settings you require.
D Using the number keys or a Quick Dial key, specify a destination.
To specify a destination using a Quick Dial key, see “Using the Quick Dial
Keys”.
If you make a mistake, press the {Clear/Stop} key, and then enter the correct
number.
E Press the {Start} key.
The machine dials a destination.
Note
❒ Documents are not stored in memory.
Reference
p.43 “Original Type”
p.44 “Resolution”
p.45 “Image Density (Contrast)”
p.47 “Sending Over a Fax Line”
p.49 “Sending by IP-Fax”
p.58 “Specifying a destination using the Quick Dial key”
p.59 “Specifying a group of destinations using the Quick Dial key”
p.62 “Redial”
ARX023S

Ricoh 2000 Specifications

General

Modem Speed	33.6 Kbps
Transmission Speed	3 seconds per page
Paper Tray Capacity	250 sheets
Type	Laser
Compatibility	Super G3
Printing Speed	20 pages per minute
Dimensions	370 x 390 x 245 mm