Internet Fax Functions
29
1
Note
❒ The Internet Fax function supported by this machine is compliant with ITU-
T Recommendation T.37.
❒ You can receive e-mail messages with an attached TIFF-F image from computers.
❒ Though Internet Fax documents are normally sent via an SMTP server, you
can also send Internet Fax documents directly to their destinations without
going through an SMTP server. To do this, program “Use SMTP Server” to a
User Function key in advance.
❒ When sending Internet Fax documents, you can specify “Attach Subject” and
“Return Receipt” in [TX Mode].
❒ You can limit the size of transmitted e-mail messages in “E-mail Settings” of
“Fax Features”.
❒ See “Received Images” for how e-mail is actually received by the computer.
❒ For details about how to confirm the transmission result, see “Checking the
Transmission Result (TX File Status)”.
❒ When you transmit an Internet Fax specifying a user code, and the email ad-
dress is set as the routing destination of the specified user code, a Communi-
cation Result Report is sent after the transmission is completed. This makes it
possible to verify the result of a transmission.
❒ You cannot send e-mails to a destination as cc.
Reference
p.56 “Bypassing the SMTP server”
p.98 “Entering the Subject”
p.99 “Requesting a Reception Notice”
p.125 “Received Images”
p.143 “Checking the Transmission Result (TX File Status)”
“Connecting the Machine”, General Settings Guide
“System Settings”, General Settings Guide
“Fax Features”, General Settings Guide
To Next Page
Loading...
Need help?
General
