3. Enter SP Mode as follows:
1) Press the clear modes key.
2) Wait for 2 or 3 seconds while the display returns to the initial screen.
3) Enter "107".
4) Hold down the clear/stop key for more than 3 seconds.
4. Touch the SP special feature key [A].
5. Touch the Previous key [B] to select the paper tray size setting mode
(page 12).
6. Touch the appropriate paper size key and direction key for the 3rd feed
station. Then touch the Index key [C].
[A]
[B]
[C]
Installation
SM 3-27 A172/A199
To Next Page
Loading...
