Ricoh A172 - To Change the Value of the Γ Correction Data

1.1.3
To change the value of the
γ
correction data
1. Enter the SP mode and touch
No. 4 SP Special Feature
.
2. Go to page 2 (letter mode) or page 3 (photo mode) and change the
OFFSET values. (Refer to the tables on the next page.)
NOTE:
Make sure Auto Image Density is
not
selected.
NOTE:
Always adjust the color balance using the "OFFSET" keys only.
Do not change the values in the "STEP" column.
3. To finish the operation, touch the
Index
[B] key to return to the SP mode
menu. Touch the
Exit
key to exit the SP mode.
•
To back up the current settings, refer to the information in chapter 4,
"Service Tables".
Rev. 10/18/96
⇐
Replacement
and
Adjustment
SM 5-5 A172/A199