Ricoh A172 - To Input Settings; To Clear the Counters

1.1.6 To Input Settings
If and keys [A] are displayed as shown, touch the key or
key to change the setting. In this case, the default setting is 00.
If the keys display numbers, as shown:
1) Touch the key [B]. Its color will change.
2) Input the setting with the numeric keys.
3) Touch the key [B] again to store the setting.
NOTE: If you forget to touch key [B] again, the setting will not be changed.
1.1.7 To Clear the Counters
1. Touch the clear key [C].
2. To clear the counter, touch the key [D].
To cancel without clearing the counter, touch the key [E].
[A]
[B]
[C]
[D]
[E]
Service
Tables
SM 4-3 A172/A199