Ricoh A172 - Feed-Out Motor Replacement

15.7 FEED-OUT MOTOR REPLACEMENT
1. Remove the feed-out unit. (Refer to Feed-out Unit Removal.)
2. Remove the spring [A].
3. Remove the bracket [B] with the feed-out motor from the feed-out unit (3
screws).
NOTE:
When reinstalling the bracket, be sure to set the arm [C] on the
plunger pin [D].
4. Remove the pulley [E] (1 Allen screw [F]).
5. Remove the feed-out motor [G] (4 screws).
[B]
[A]
[F]
[G]
[E]
[C]
[D]
Dual Job Feeder
DF62 (A610)
SM 7-35 A172/A199