Ricoh A172 - Inverter Roller Replacement

15.10 INVERTER ROLLER REPLACEMENT
1. Turn off the main switch and remove the feed-out unit. (Refer to
Feed-out Unit Removal.)
2. Remove the feed-out motor [A]. (Refer to Feed-out Motor Removal.)
3. Remove the exit guide [B] (3 screws).
4. Remove the inverter roller [C] with the inverter guide [D] (2 E-rings, 1
pulley, 1 pin [E], and 2 bushings).
5. Replace the inverter roller.
[B]
[A]
[E]
[D]
[C]
A172/A199 7-38 SM