15.2 TRANSPORT BELT REPLACEMENT
NOTE:
Never use alcohol to clean the transport belt. The coating will be
damaged.
1. Turn off the main switch and lift up the DJF.
2. Remove the front cover [A] (3 screws).
3. Remove the 4 screws securing the transport belt guide assembly [B].
4. Fold the stay [C] as shown.
5. Remove the transport belt [D].
[A]
[B]
[C]
[D]
Dual Job Feeder
DF62 (A610)
SM 7-29 A172/A199
To Next Page
Loading...
