Page Item Function Note
<2>
-5
SC Detection
OFF Mode
Disables the self-diagnostic
function.
Default: Reset (enable)
Jam Detection
OFF Mode
Disables jam detection (ON
check).
Default: Reset (enable)
Printer Free Run Starts printer free run mode. Paper is not fed in this mode.
System Free
Run
Starts system free run mode. Paper is not fed in this mode.
When using the system free
run, close the platen cover or
place white paper on the
exposure glass to avoid toner
scattering inside the machine.
Scanner Free
Run
Starts scanner free run mode. Paper is not fed in this mode.
Auto Shading
Mode Data
Selection
Separately performs the
shading compensation
sequence.
Factory use only
<2>
-6
AGC Start Lamp
Voltage
Separately performs the auto
gain control sequence.
Factory use only
VR Adjustment
Mode
Turns on the exposure lamp. Factory use only
APS Data
Confirmation
Checks if the original size
sensors are correctly activated
or de-activated at the 1st and
2nd detection.
Status 0 --- de-activated
Status 1 --- activated
Service
Tables
SM 4-25 A172/A199
To Next Page
Loading...
