Ricoh A172 - Page 210

Page Item Function Note
<10>
-1
Copier Special
Mode
Sets the following items for
Copier Special Mode 1 and 2.
<1>SP Adjustment
-1: Lead Edge Registration
(Printing)
-1: Paper Feed Timing
-2: Paper Feed Timing: By-pass
-3: Face side Fusing Temp.
-3: Back side Fusing Temp.
-7: Transfer Roller Bias
(Normal Humidity)
-8: Transfer Roller Coefficient
by Humidity Range
*1 Change the setting from "0"
to "4" for "Thick 2nd Feed"
in SP <1>-2 By-pass Feed
in order to ensure feeding of
very thick paper in
Special Mode 1.
<4>SP Special Features
-2: Printer g Correction Data
Rough Adjustment =Letter=
-3: Printer g Correction Data
Rough Adjustment =Photo=
-4: Printer g Correction Data
Fine Adjustment
=Printed Photo=
-5: Printer g Correction Data
Fine Adjustment
=Glossy Photo=
-6: Printer g Correction Data
Fine Adjustment =Letter=
*2 Printer
γ
correction data in
this mode is independent
from that in the standard
mode. (ACC results will not
be reflected.)
This special mode should be
used for user’s special
application paper which does
not have good copy quality with
standard settings.
"<4>-5: Printer g Correction
Data Fine Adjustment = Glossy
Photo=" is not effective
(indication only).
Special Mode 1 has the
following default for very thick
paper (about 200 g/m2):
<1>-7:Transfer Roller Bias
(Normal Humidity)
Normal Paper
1C: 1200 2C: 1500
3C: 1800 4C-L&P: 1500
Thick Paper
1C: 1360 2C: 1500
3C:1800 4C-L&P: 1500
OHP: S&L
1C: 2020 2C: 2080
3C: 2370 4C-L&P: 2080
Normal: Back
1C: 1200 2C: 1700
3C: 1980 4C-L&P: 1700
Thick: Back
1C: 1600 2C: 1830
3C: 2130 4C-L&P: 1830
Printer Special
Mode
Sets the following items for
Printer Special Mode 3.
<1>SP Adjustment
-1: Lead Edge Registration
(Printing)
-1: Paper Feed Timing
-2: Paper Feed Timing: By-pass
-3: Face side Fusing Temp.
-3: Back side Fusing Temp.
-7: Transfer Roller Bias
(Normal Humidity)
-8: Transfer Roller Coefficient
by Humidity Range
This special mode should be
used for user’s special
application paper (Printer
mode) which does not have
good copy quality with standard
settings.
⇒
Rev. 1/16/97
Service
Tables
SM 4-59 A172/A199