NOTE:
When installing, do the following.
•
Handle the lubricant bar [A] gently. They break or crack easily.
•
When resting the lubricant bar bracket [B] on the unit, make sure
that the spring plate [C] is positioned as shown. (The spring plate
should not be under the lubricant bar bracket.)
•
To install the hook [D], press the lubricant bar bracket in the
direction [E] as shown above.
•
When reinstalling the lower guide [G], flip the upper guide [F] to
the normal position. Do not push it in the direction indicated by
the arrow [H]. Let the guide lie naturally in its position, then
tighten the 2 screws.
[B]
[C]
[E]
[A]
[D]
[D]
[G]
[F]
[H]
Replacement
and
Adjustment
SM 5-23 A172/A199
To Next Page
Loading...
