SC191: Bar code scanning error
- Definition - [B]
The bar code for the machine identification number cannot be detected
when the AGC is performed after the main switch is turned on.
- Possible causes -
• The bar code label is dirty.
• Scanner mirrors are not in position
SC192: Bar code number is different
- Definition - [B]
The bar code number is not identical to the machine identification number
stored in memory.
- Possible causes -
• Wrong machine identification number in memory
• Machine identification number is not entered in the new (replaced)
RAM board
• RAM board defective
• Main control board defective
SC193: IDU connection error
- Definition - [B]
IDU connection cannot be detected.
- Possible Causes -
• IDU is disconnected
• IDU defective
SC194: IDU detection error
- Definition - [B]
IDU detection error
- Possible Causes -
•
IDU defective
A172/A199 6-6 SM
To Next Page
Loading...
