(2) Continuous mode
The self-diagnostic program in the continuous mode repeats the selected test
without cessation. It displays the number of times it repeats the test. You can
stop this test by using the End key. If a problem is detected, the machine
stops the test and displays information about the problem. The self-diagnostic
program does not support the continuous mode for the following tests:
• LCD pattern test
• Touch panel test
•
LED/conventional key test
•
CMOS RAM test
ID :
✱ ✱
Please select function and execution key.
Main RAM Read/Write Test
Video RAM Read/Write Test
VGA Register Test
LCD Test
Test
Touch Panel Test
LED/Conventional Key Test
CMOS RAM Test
Exit
System ROM Check Sum Test
Cont Exec
Operational Panel Diagnostic Menu
Reverse display indicating that the ROM
check sum test is selected.
Pressing this key starts the selected test in
the continuous mode.
A172/A199 6-34 SM
To Next Page
Loading...
