(i) Message after the test
(a) If the test is successful:
• [Test Successful] appears at the center of the screen.
(b) If the test is unsuccessful:
• [Test Failed] appears at the center of the screen.
• Error information appears at the lower left-hand corner of the screen.
Remarks: Error information
Check data 0000h is displayed because of 0 addition.
Error data Result of adding data in word units
(ii) Processing after the test
(a) If the test is successful:
•
Test mode: The system executes the next test.
•
Continuous mode: The system repeats the same test.
•
Execution mode: The system displays [Menu].
You must press [Menu] to return to the menu screen.
(b) If the test is unsuccessful:
•
The system displays the error message and [Menu].
You must press [Menu] to return to the menu screen.
Test Count :
4444
Menu
4444
CHECK DATA : 0000
ERROR DATA :
4444
System ROM Check Sum Test
Error information
Test result message
If the test is a success, [Test successful]
appears.
If it is not, [Test Failed] appears.
[Menu] key.
You must press this key to return
to the menu screen.
Trouble -
shooting
SM 6-39 A172/A199
To Next Page
Loading...
