(ii) Test execution
• If the clock operation is normal, press [OK].
(iii) Processing after the test
The following shows what the system does after the test.
(a) If you press [OK]:
• Test mode: The system executes the next test.
• Execution mode: The system displays [Menu].
You must press [Menu] to return to the menu screen.
(b) If you press [NG]:
•
The system displays [Menu]. You must press [Menu] to return to the
menu screen.
NOTE:
The system does not support the continuous mode for the CMOS
RAM test. It can only perform this test once in the execution or test
mode.
NGOK
CMOS RAM (Date & Time) Test
Date :
44
-
44
-
44
Time :
44
:
44
:
44
Current date settings
If the test is a success, press the [OK]
key. If it is not, press the [NG] key.
Current settings in the RTC
Trouble -
shooting
SM 6-51 A172/A199
To Next Page
Loading...
