Symbol Name Function Index No.
Solenoids
SOL1
Inverter Inverts the original when copying
two-sided originals.
9
SOL2
Stopper Lifts the original stopper and lowers the
press roller to feed the set of originals to
the feed roller.
22
PCBs
PCB1
DF Main Board Controls all DJF functions.
6
Magnetic Clutch
CL1
Feed-in Transmits the feed-in motor drive to the
pick-up, feed, and pull-out rollers.
21
Indicator Lamps
L1
Ready Informs the operator that the DJF is in the
down position.
4
Auto Informs the operator that the auto feed
mode is available.
A172/A199 7-6 SM
To Next Page
Loading...
