Ricoh A172 - SUBJECT: OPERATION PANEL DISPLAYS METRIC SIZES

RICOH GROUP COMPANIES
8)',2-'%0#7)6:-')#&900)8-2
&900)8-2#291&)6U %EKFf %EMM#g #NEH NLfFKfML
%440-'%&0)#13()0U
####+)78)82)6#h#FJNJ)fFJNJ
####6-'3,#h#%*-'-3#'3036#IFNJfIENJ
####7%:-2#h#7('FNJ)f7('FNJ
SUBJECT: OPERATION PANEL DISPLAYS METRIC SIZES
SYMPTOM:
Operation panel displays metric paper sizes.
CAUSE:
The Length Unit has been improperly set.
SOLUTION:
1. Enter Service Program Modes.
2. Select SP Special Features, Page (9) Nine.
3. Change the length Unit setting from millimeters to inches.
4. Turn the machine “Off” and then “On”.
Note:
This copy is intended as a master original
for reproduction of additional bulletins.
„
ELECTRICAL
CONTROL NO. 302