Tech Service Bulletin No. A172/A199 – 016
Page 11 of 17
•
Confirming Transfer Belt Bias Voltage - (T1)
Enter SP Adjustments page 5, note the original setting for 1C First Color, then set 1C First Color to 1430V
(default value) as illustrated below:
Connect a meter as pictured below:
Continued…
CAUTION HIGH VOLTAGE! Use caution when working in this area
Do not touch the meter, meter leads, or allow the leads to touch frame ground
1430V
######63 &RS\#LQ#63
###,QGH[
?0HQX!
6HOHFW#IXQFWLRQ#RU#LWHP
?4!#63#$GMXVWPHQW
7UDQVIHU#%HOW#%LDV#+)DFH#6LGH=#1RUPDO#+XPLGLW\,
Adjust
to 1430V
PAGE 5
1
st
color
Insert the Red Meter
Lead into this white
CN. The black lead
goes to Frame
Ground
To Next Page
Loading...
