RICOH GROUP COMPANIES
CONTROL NO. 348
8)',2-'%0#7)6:-')#&900)8-2
&900)8-2#291&)6U %EKFf%EMM#g#NFH NIfNGfMM
%440-'%&0)#13()0U
####+)78)82)6#h#FJNJfFJNJ)
####6-'3,#h#%*-'-3#'3036#IENJfIFNJ
####7%:-2#h#7('FNJf#7('FNJ)
SUBJECT: BELT DRIVE ROLLER
GENERAL:
To prevent the mis-registration of colors, the material of the belt drive roller has been changed. The new
roller has higher friction to prevent slipping of the belt after the Transfer Belt Switchback operation. The
following Parts Update is being issued for all A172/A199 Parts Catalogs.
REFERENCE
OLD PART NO. NEW PART NO. DESCRIPTION QTY INT PAGE ITEM
A1096063 A1096062 Belt Drive Roller 1 1 67 14
UNITS AFFECTED:
All copiers manufactured after the Serial Numbers listed below will have the new style Belt Drive Roller
installed during production.
MODEL NAME SERIAL NUMBER
Gestetner 2606e AB69010001
Gestetner 2606 AB49010001
Ricoh Aficio Color 5206 A7128120001
Ricoh Aficio Color 5106 A7138120001
Savin SDC206 5A98120001
Savin SDC206E 5A88120001
INTERCHANGEABILITY CHART:
0
OLD and NEW parts can be used in both OLD and
NEW machines.
2
NEW parts CAN NOT be used in OLD machines.
OLD parts can be used in OLD and NEW machines.
1
NEW parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
OLD parts CAN NOT be used in NEW machines.
NEW parts CAN NOT be used in OLD machines.
3/S
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
previously modified, use the new part numbers individually.
„
PARTS
Note:
This copy is intended as a master original
for reproduction of additional bulletins.
To Next Page
Loading...
