Ricoh A172 - SUBJECT: TRANSFER BELT



 2000 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
BULLETIN NUMBER: A172/A199 - 028 04/28/2000
APPLICABLE MODEL:
GESTETNER – 2606E/2606
RICOH – AFICIO COLOR5206/5106
SAVIN – SDC206E/SDC206
SUBJECT: TRANSFER BELT
GENERAL:
Customers that make mostly black and white copies may cause the rubber guide to peel off the Transfer
Belt. The Transfer Belt has been modified to strengthen the adhesion of the rubber guide The following part
correction is being issued for all A172 and A199 Parts Catalogs.
REFERENCE
OLD PART NO. NEW PART NO. DESCRIPTION QTY INT PAGE ITEM
A1096130 A1726130 Transfer Belt 1-1 0 67 15
INTERCHANGEABILITY CHART:
0
OLD and NEW parts can be used in both OLD and
NEW machines.
2
NEW parts CAN NOT be used in OLD machines.
OLD parts can be used in OLD and NEW machines.
1
NEW parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
OLD parts CAN NOT be used in NEW machines.
NEW parts CAN NOT be used in OLD machines.
3/S
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
previously modified, use the new part numbers individually.
Note: This copy is intended as a master original for reproduction of additional bulletins.
!
PARTS
Rubber Guide
CONTROL NO. 025CLR