Ricoh A172 - Page 97

3. Remove the right inner cover [A] (3 screws) and the bracket [B] securing
the toner tank to the front side plate (1 screw).
4. Remove the bracket [C] securing the transfer roller unit (1 screw).
5. Install the operating instruction holder [D] (2 truss screws [M4 x 8]).
6. Push and slide out the toner tank [E]. Then remove the toner tank (2
screws).
[E]
[A]
[B]
[D]
[C]
A172/A199 3-8 SM