Error Codes
D418 42 SM
Code Meaning
15-80 Mail Job Task Read Error
Could not receive the transmission because the
destination buffer is full and the destination could
not be created (this error may occur when
receiving a transfer request or a request for
notification of reception).
15-81
Repeated Destination
Registration Error
Could not repeat receive the transmission because
the destination buffer is full and the destination
could not be created (this error may occur when
receiving a transfer request or a request for
notification of reception).
15-91 Send Registration Error
Could not receive the file for transfer to the final
destination:
The format of the final destination or the
transfer destination is incorrect.
Destinations are full so the final and transfer
destinations could not be created.
15-92 Memory Overflow
Transmission could not be received because
memory overflowed during the transaction.
15-93 Memory Access Error
Transaction could not complete due to a
malfunction of SAF memory.
15-94 Incorrect ID Code
The machine rejected an incoming e-mail for
transfer request, because the ID code in the
incoming e-mail did not match the ID code
registered in the machine.
15-95 Transfer Station Function
The machine rejected an incoming e-mail for
transfer because the transfer function was
unavailable.
22-00
Original length exceeded
the maximum scan
length
Divide the original into more than one page.
Check the resolution used for scanning. Lower
the scan resolution if possible.
To Next Page
Loading...
Need help?
General
