Service RAM Addresses
SM 159 D418
Fax Option
Type 9001
D418
Bit 6: Scan sequence in Book transmission, 0: Left page then right page, 1: Right page
then left page
Bit 7: Not used
6800D7(H) - User parameter switch 07 (SWUSR_07)
Bits 0 and 1: Not used
Bit 2: Parallel memory transmission, 0: Off, 1: On
Bits 3 to 7: Not used
6800D8(H) - User parameter switch 08 (SWUSR_08)
Bits 0 and 1: Not used
Bit 2: Authorized reception
0: Only faxes from senders whose RTIs/CSIs are specified for this feature are
accepted.
1: Only faxes from senders whose RTIs/CSIs are not specified for this feature are
accepted.
Bits 3 to 7: Not used
6800D9(H) - User parameter switch 09 (SWUSR_09): Not used
6800DA(H) - User parameter switch 10 (SWUSR_0A)
Bit 0: Not used
Bit 1: 2 into 1, 0: Off, 1: On
Bit 2: Not used
Bit 3: Page reduction, 0: Off, 1: On
Bit 4: Not used
Bit 5: Reception file printout, 0: Disabled, 1: Enabled
Bit 6: Use both e-mail notification and printed reports to confirm the transmission
results, 0: Off, 1: On
Bit 7: Not used
6800DB(H) - User parameter switch 11 (SWUSR_0B)
Bit 0: Not used
Bit 1: Not used
Bits 2 to 5: Not used
Bit 6: Printout of messages received while acting as a forwarding station, 0: Off, 1: On
Bit 7: Polling Standby duration, 0: Once, 1: No limit
6800DC(H) - User parameter switch 12 (SWUSR_0C): Not used
6800DD(H) - User parameter switch 13 (SWUSR_0D): Not used
6800DE(H) - User parameter switch 14 (SWUSR_0E)
Bit 0: Message printout while the machine is in Night Printing mode, 0: On, 1: Off
To Next Page
Loading...
Need help?
General
