Service Program Mode Tables
D062/D063/D065/D066 4-108 SM Appendix
0: RFU is executed whenever update request is received.
1: RFU is executed only when the machine is in the sleep mode.
RCG – C Registed
021
This SP displays the Embedded RC Gate installation end flag.
0: Installation not completed
1: Installation completed
RCG – C Regist Detail
022
This SP displays the Embedded RC Gate installation status.
0: RCG device not registered
1: RCG device registered
2: Device registered
Connect Type (N/M)
023
This SP displays and selects the Embedded RC Gate connection method.
[0 or 1 / 0 / 1 /step
0: Internet connection
1: Dial-up connection
Cert. Expire Timing DFU
061
Proximity of the expiration of the certification.
Use Proxy
062
This SP setting determines if the proxy server is used when the machine
communicates with the service center.
Proxy Host
063
This SP sets the address of the proxy server used for communication
between Embedded RC Gate-N and the gateway. Use this SP to set up or
display the customer proxy server address. The address is necessary to set
up Embedded RC Gate-N.
The address display is limited to 128 characters. Characters beyond
the 128 character are ignored.
To Next Page
Loading...
Need help?
General
