Service Program Mode Tables
SM Appendix 4-111 D062/D063/D065/D066
Appendix:
Service
Program
Mode Tables
2
An SSL error notification has been issued. Issued after the certification
has expired.
3
Notification of shift from a common authentication to an individual
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069 CERT: Up ID The ID of the request for certification.
083 Firmware Up Status Displays the status of the firmware update.
084 Non-HDD Firm Up
This setting determines if the firmware can be
updated, even without the HDD installed.
0: Not allowed update
1: Allowed update
085 Firm Up User Check
This SP setting determines if the operator can
confirm the previous version of the firmware
before the firmware update execution. If the
option to confirm the previous version is
selected, a notification is sent to the system
manager and the firmware update is done with
the firmware files from the URL.
086 Firmware Size
Allows the service technician to confirm the size
of the firmware data files during the firmware
update execution.
087 CERT: Macro Ver.
Displays the macro version of the @Remote
certification.
088 CERT: PAC Ver.
Displays the PAC version of the @Remote
certification.
089 CERT: ID2 Code
Displays ID2 for the @Remote certification.
Spaces are displayed as underscores (_).
To Next Page
Loading...
Need help?
General
