Basic Procedure for Saving Scan Files on a
Removable Memory Device
Use the following procedure to save scan files on a removable memory device.
1. Insert a removable memory device in the media slot.
You can connect only one removable memory device at a time.
2. Close the media slot cover.
If you leave the cover open, static electricity conducted through an inserted SD card could cause the
machine to malfunction.
3. Make sure that no previous settings remain.
If a previous setting remains, press the [Clear Modes] key.
4. Place originals.
5. Press [Store File].
6. Press [Store to Memory Device].
7. Press [OK].
8. If necessary, press [Scan Settings] to specify scanner settings such as resolution and scan
size.
For details, see "Various Scan Settings".
9. If necessary, specify the scanning density.
For details, see "Adjusting Image Density".
Basic Procedure for Saving Scan Files on a Removable Memory Device
115
To Next Page
Loading...
