8. Press [Change] under "Realm Name".
9. Enter the realm name, and then press [OK].
Enter the realm name, or host name.
You can enter a realm name using up to 64 characters.
10. Press [Change] under "KDC Server Name".
11. Enter the KDC server name, and then press [OK].
Enter the KDC server name, host name, or IPv4 address.
You can enter a KDC server name using up to 64 characters.
12. Press [Change] under "Domain Name".
13. Enter the domain name, and then press [OK].
Enter the domain name, or host name.
You can enter a domain name using up to 64 characters.
14. Press [OK].
15. Press [Exit].
16. Press the [User Tools/Counter] key.
Changing the Realm
This section describes how to change the programmed Realm.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] twice.
5. Press [Program / Change / Delete Realm].
6. Check that [Program / Change] is selected.
7. Select the Realm you want to change.
Programming the Realm
65
To Next Page
Loading...
