Parameter Value configured
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
srvcert {on|off} You can set the server certificate. The default is
“off”.
imca {on|off} You can enable or disable the certificate when
the intermediate certificate authority is present.
The default is “off”.
srvid “character string” You can set the server ID and subdomain of the
certificate server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
Connectinfo Obtains connection information.
claer {a each command|all} Returns the selected setting to its default value.
If you specify “all”, all settings will be restored
to their default values.
miccheck {on|off} You can enable or disable the MIC check
function.
The default setting is “On” (enabled).
If you specify “Off”, you cannot perform MIC
checks. We recommend you specify “On” for
the MIC check function when using this machine.
wins
Use the “wins” command to configure WINS server settings.
Viewing settings
msh> wins
• If the IPv4 address obtained from DHCP differs from the WINS IPv4 address, the DHCP address
is the valid address.
Configuration
msh> wins “interface_name” {on|off}
• {on} means “active” and {off} means “inactive”.
• Be sure to specify the interface.
Remote Maintenance by telnet
199
To Next Page
Loading...
