Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under System Settings.
• If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed
might occur because the correct paper size was not detected.
Paper Tray Priority: Copier (copier/document Server)
Specify the tray to supply paper for output.
The default setting is [Tray 1].
If the LCT is installed, [LCT] is displayed.
Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
The default setting is [Tray 1].
If the LCT is installed, [LCT] is displayed.
Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
The default setting is [Tray 1].
If the LCT is installed, [LCT] is displayed.
The default tray switches to LCT, if the LCT is installed.
Printer Bypass Paper Size
Specify the size of the paper in the bypass tray when printing data from the computer.
The paper sizes you can set for bypass tray are as follows:
• [Auto Detect], 12 × 18 , 11 × 17 , 8
1
/
2
× 14 , 8
1
/
2
× 13 , 8
1
/
2
× 11 , 8
1
/
2
× 11
, 8
1
/
4
× 13 , 8 × 13 , 7
1
/
4
× 10
1
/
2
, 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, 4
1
/
8
× 9
1
/
2
, 3
7
/
8
× 7
1
/
2
, A3 , A4 , A4 , A5 , A5 , A6 , B4 JIS , B5 JIS , B5 JIS , B6 JIS
, C5 Env , C6 Env , DL Env , [Custom Size]
You can specify a custom size of between 3.55 - 12.00 inch (90.0 – 305.0 mm) vertically, and
between 5.83 – 23.62 inch (148.0 - 600.0 mm) horizontally.
You can specify a custom size of between 3.55 - 12.00 inch (90.0 - 305.0 mm) vertically, and
between 5.83 - 49.60 inch (148.0 - 1260.0 mm) horizontally. For details about specifying custom
paper sizes, contact your sales or service representative.
Tray Paper Size: Tray 1
Specify the size of the paper in the bypass tray when printing data from the computer.
The paper sizes you can set for bypass tray are as follows:
• 11 × 8
1
/
2
1. System Settings
24
To Next Page
Loading...
