Ricoh Aficio MP C2800 Function Guide

16. Specify whether or not to share the printer, and then click [Next >].
17. Specify whether or not to print a test page, and then click [Next >].
18. Click [Finish].
The printer driver installation starts.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch “Setup.exe” on
the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows XP, Windows Server 2003 /
2003 R2)
• Installing this printer driver requires Administrators permission. Log on using an account that has
Administrators permission.
• In an IPv6 environment, you cannot use the Standard TCP/IP Port. Use the DeskTop Binder-
SmartDeviceMonitor port.
• You can install the printer driver from the CD-ROM provided with this machine or download it from
the supplier's Web site.
• If your operating system is Windows XP Pro x64, Windows Server 2003 / 2003 R2 x64, you must
download the printer driver from the manufacturer's Web site. Select this printer and the operating
system you are using, and then download it.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Next >].
6. Click [Local printer attached to this printer], and then click [Next >].
Using the Standard TCP/IP Port
23
1

Ricoh Aficio MP C2800 Specifications