• If [SADF] is selected, scanning starts as soon as you place additional originals in the ADF.
However, in the following cases you must press the [Start] key to start scanning additional
originals.
• After scanning additional originals using the exposure glass
• After changing settings while waiting for additional originals
• After opening/closing the ADF
• p.185 "Scan Settings"
• p.164 "Scanning Multiple Pages of Originals as One File"
Divide
This section explains settings for dividing multiple originals by a specified number of pages and then sending
them.
1. Press [Original Feed Type].
2. Press [Divide].
3. Press [Change], and then use the number keys to enter the number of pages you want to
divide the job into sets of.
4. Press the [ ] key.
8. Various Scan Settings
162
To Next Page
Loading...
