• Realm Name
• KDC Server Name
• Domain Name
Be sure to set both the realm name and KDC server name when programming a realm.
For details about Program/Change/Delete Realm, see "Programming the Realm".
AOF (Always On)
Specify whether or not to use Auto Off.
The default setting is [On].
Energy Saver Level
Specify the level for Energy Saver mode.
If you specify [Level 1], the machine switches from Energy Saver mode to Normal mode and is ready
to begin copying in about three seconds.
If you specify [Level 2], the machine switches from Energy Saver mode to Normal mode and is ready
to begin copying about ten seconds. When set to [Level 2], the machine consumes less power than
when set to [Level 1].
The default setting is [Level 1].
Firmware Version
You can check the version of the software installed in this machine.
Network Security Level
For details about this function, consult your administrator.
Auto Erase Memory Setting
For details about this function, consult your administrator.
Erase All Memory
For details about this function, consult your administrator.
Delete All Logs
For details about this function, consult your administrator.
Transfer Log Setting
For details about this function, consult your administrator.
Data Security for Copying
For details about this function, consult your administrator.
Fixed USB Port
Specify whether or not to fix the USB port.
The default setting is [Off].
1. System Settings
56
To Next Page
Loading...
