Menu User Tool Setting Requirements
File Transfer POP3 / IMAP4 Settings As required
File Transfer Administrator's E-mail Address As required
File Transfer E-mail Communication Port As required
File Transfer
Program / Change / Delete E-
mail Message
As required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and
wireless LAN are connected, the selected interface takes precedence.
• When POP before SMTP is set to [On], you must also make settings for Reception Protocol and POP3 /
IMAP4 Settings.
• When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.
• p.33 "Interface Settings"
• p.41 "File Transfer"
Network Settings Required to Use E-mail Function
85
To Next Page
Loading...
