1. In the destination list, press the key including the destination name.
The key of the selected destination is highlighted, and the destination appears in the destination field
at the top of the screen.
If the target destination does not appear, take one of the following steps:
• Display the destination by selecting its initial letter from the title
• Display the destination by pressing [ ] or [ ]
• Depending on the security setting, some destinations may not appear in the destination list.
Selecting destinations by entering the registration numbers
Select the destination from the machine's address book using its registration number.
1. Press [Reg. No.].
2. Using the number keys, enter the five-digit registration number assigned to the required
destination.
If the entered number is less than five digits, press the [ ] key after the last number.
Example: To enter 00003
Press the [3] key, and then press the [ ] key.
By pressing [Change], you can change the selected destination.
1. Sending Scan Files by E-mail
32
To Next Page
Loading...
