Parameter Value configured
imca {on|off} You can enable or disable the certificate when
the intermediate certificate authority is present.
The default is "off".
srvid "character string" You can set the server ID and subdomain of the
certificate server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
claer {a each command|all} Returns the selected setting to its default value.
If you specify "all", all settings will be restored to
their default values. However, IEEE 802.1x
Auth. status (enable or disable) for Ethernet and
wireless LAN will not be initialized.
Remote Maintenance by telnet
203
To Next Page
Loading...
