To change the fax number
This section describes how to change the fax number.
1. Press [Change] under "Fax Destination".
2. Enter the new fax number using the number keys, and then press [OK].
To change the line
This section describes how to change the line.
1. Press [Select Line].
2. Select the line, and then press [OK].
To program the SUB Code
This section describes how to program the SUB Code.
1. Press [Adv. Features], and then press [SUB Code].
2. Press [Change] under "TX SUB Code".
3. Enter the new SUB Code, and then press [OK].
4. To change the password, press [Change] under "Password (SID)".
5. Enter the new password, and then press [OK].
6. Press [OK].
To program the SEP Code
This section describes how to program the SEP Code.
1. Press [Adv. Features], and then press [SEP Code].
2. Press [Change] under "RX SEP Code".
3. Enter the new SEP Code, and then press [OK].
5. Registering Addresses and Users for Facsimile/Scanner Functions
262
To Next Page
Loading...
