1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book: Program / Change / Delete Group].
5. Check that [Program / Change] is selected.
6. Press the group key you want to change.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.
7. To change the group name and key display, press [Change] under "Group Name" or "Key
Display".
8. Enter the new group name or key display, and then press [OK].
9. To change the title, press the title key under "Select Title".
10. To change the registration number, press [Change] under "Registration No.".
11. Enter the new registration number using the number keys.
12. Press the [ ] key.
13. Press [OK].
14. Press [Exit].
15. Press the [User Tools/Counter] key.
Registering Names to a Group
301
To Next Page
Loading...
