9. Press [Change] for "Domain Name".
10. Enter the domain name, and then press [OK].
You cannot specify a domain name under an authentication system that does not support domain
login.
11. Press [Obtain URL].
The machine obtains the URL of the server specified in "Server Name".
If "Server Name" or the setting for enabling SSL is changed after obtaining the URL, the URL is "Not
Obtained".
12. Press [Exit].
In the "Authentication Type", if you have not registered a group, proceed to step 17.
If you have registered a group, proceed to step 13.
Integration Server Authentication
75
To Next Page
Loading...
