Ricoh CX2 - Pre-AF

107
Shooting Menu
4
If [On] is selected when [Multi AF], [Spot AF], [Continuous AF], or
[Multi-trgt AF] is selected for [Focus] (G P.103), the camera will
continue to focus even when the shutter-release button is not
pressed halfway. This may decrease the time needed to focus
when a picture is taken, potentially improving shutter response.
1 Display the shooting menu.
• For information on using the menu, see P.100.
2 Press the ADJ./OK button " to
select [Pre-AF] and press the
button $.
3 Press the button !" to select
the desired setting.
4 Press the ADJ./OK button.
Caution------------------------------------------------------------------------------------------
Pre-AF is not available when [MF], [Snap], or [A] is selected for [Focus].
Pre-AF