90
Shooting Mode Types
3
In this mode, the camera shoots while the shutter-release button is
pressed, but only the last 30 frames (about the last second of
shooting) are recorded to create a single multi-picture (MP) file.
1
Turn the mode dial to R.
2
Press the MENU button.
• The continuous mode selection screen appears.
3
Press the ADJ./OK button !"
to select [M-Cont Plus (2M)].
4
Press the ADJ./OK button.
• The symbol appears on the screen.
5
Compose your picture and
then press and hold the shutter
release button.
• The camera memorizes the scene while you hold down the shutter
release button.
6
Release your finger from the shutter release button.
• Shooting ends and the last 30 shots (about the last second of
shooting) are recorded in a single MP file.
• If you remove your finger from the shutter-release button before 30
shots are recorded, the MP file will contain all the shots taken while the
shutter-release button was pressed.
M-Cont Plus (2M)
(1) When you remove your finger from the shutter release button...
(2) …the camera records the frames taken in the last second.
To Next Page
Loading...
Need help?
General
